Range 01
Metal & Rubber Parts
Engine mountings, suspension bushings, dampers, vibration isolators, body mounts, and frame-rail bushings. The bonded rubber-to-metal foundation of every OEM program we run.
EST. 2003 · TANGERANG · ISO 9001:2015 by SGS
PBR — Rubber Parts Manufactured for OEM Buyers in Indonesia Since 2003
PBR (PT. Putrabangun Rubberindo) has built engine mountings, bushings, hoses, seals, and custom molded rubber parts for OEM customers for 22 years. Our 10,000 sqm Cikupa factory is SGS-certified to ISO 9001:2015 and trusted by Hino, Suzuki, Honda, ROKI, APM, GSS, TACI, BMT, and PT. Enomoto Srikandi Industries.
22Years OEM manufacturing
10,000sqm Cikupa factory
65+Molding machines
ISO 9001: 2015 by SGS
17Named OEM customers
Our ranges
Custom Rubber Components for Automotive, Industrial, and Power Infrastructure
Three product ranges, one near-fully integrated factory floor, one quality system. Whether you need a standard engine mounting, a bonded vibration isolator, or a custom-compounded seal that holds up against hot oil, we run it on the same 65-machine controlled process.
Range 02
Rubber Components
Oil seals, water pump seals, drum seals, air-intake hoses, custom molded parts, and industrial sealing. The unbonded, all-rubber side of our catalogue.
Range 03
Industrial Specialty
High-voltage power silicon parts, marine gaskets, industrial machinery vibration isolators, industrial seals for oil, gas, water utility and process equipment, and specialised custom molding for reliability-critical programs.
Capabilities
65+ Molding Machines, Near-Full Vertical Integration
Compounding, mixing, molding, deflashing, QC, packaging — all under one roof at our 10,000 sqm Cikupa facility. Tooling is primarily in-house (CNC milling + FDM 3D printer), with vetted external partners for advanced or highly specialized molds. We match the molding method to the part, not the marketing line.
Capability 01
Cold Runner Injection — Less Waste, Cleaner Finish
9 cold runner injection presses keep the runner channels cool so uncured rubber stays usable for the next shot. Denser parts, cleaner finishes, less flash, and 15–30% less material waste per run than compression molding on the same part.
See our equipment census
Capability 02
Primarily In-House Mold Manufacturing — Direct Iteration
Most of our molds are designed and cut on our own in-house CNC milling line, with an FDM 3D printer for prototype tooling and early fit checks. For extremely difficult or highly specialized parts we partner with vetted external tool makers — a strategic choice that keeps lead times short for the majority of programs while ensuring complex tooling gets the right specialist hands. Either way: direct iteration between mold engineer and press operator, controlled cost, IP protection.
More on our process
Capability 03
Premium Compounds, Mixed In-House
NBR, EPDM, SBR, natural rubber, CR, FKM, and silicone — sourced from Lanxess, ExxonMobil, and Sumitomo, then compounded on 2 open roll mills, a 55-litre kneader, and a 75-litre kneader. Every batch is rheometer-tested for cure profile and Mooney-tested for processability before it touches a press.
See our materials
Capability 04
SGS-Certified Quality, Customer-Specific Test Rigs
First certified to ISO 9001:2008 in 2009, upgraded to ISO 9001:2015 by SGS today. Per-batch rheometer cure checks, Mooney viscometer, tensile, ozone, aging, endurance, and measuring microscope — plus tailor-made customer-specific test machines for PPAP-level programs.
Read our quality approach
Industries
Trusted by Hino, Suzuki, Honda, and Japanese OEMs Since 2003
Named in our official company profile: Hino, Suzuki, Honda, ROKI Co. Ltd, APM, GSS, BMT, TACI, PT. Enomoto Srikandi Industries on the 4-wheel automotive side; high-voltage silicon parts for industrial power infrastructure; plus capability in industrial seals for oil, gas, water utility, and process equipment.
Japanese OEMs since 2003
Engine mountings, bushings, hoses, seals, weatherstrip, and bonded isolators for Hino, Suzuki, Honda, ROKI, APM, GSS, BMT, TACI, and Enomoto Srikandi.
High-voltage silicon parts
Silicone (VMQ) compounded for dielectric performance and thermal stability — insulator components, sealing parts, and dielectric components for utility-grade applications.
Oil, Gas, Water Utility & Process Seals
Industrial seals, gaskets, drum seals, and custom-compound parts for oil, gas, water utility, and process equipment applications. FKM where heat and aggressive chemicals are present; NBR for general oil contact.
Vibration mounts, gaskets, custom parts
Vibration isolators for conveyors, compressors, generators, and pumps. EPDM and CR for seawater and weather. Custom molding for applications that don't fit any catalogue.
Brand pillars
What We Run On — In English and Japanese
Four operating principles, written in both languages since 2003. Not a poster on the wall — the way the factory runs every shift.
Excellent Quality
最高の品質
Competitive Pricing
競争力の有る価格設定
Consistent Delivery
安定した配達
Continuous Improvement
継続的改善
Request a quote
We Reply Within One Business Day
Send us your drawing or sample, the material and hardness you need, expected annual volume, and your target lead time. We reply in English or Japanese (日本語対応) with a quote and a recommended compound.
- Email
marketingoem@pbrubberindo.co.id - Phone (Office)
+62 21 8060 4251 · +62 21 5940 0192 - OEM Sales (WhatsApp)
+62 813 3334 1230 - Factory
Jl. Talaga Mas I no. 1, Cikupa, Tangerang 15710 - Office hours
Mon–Fri 08:00–17:00 (Asia/Jakarta)